Custom Tungsten Carbide Progressive Die Deep Wire Drawing Die
Application
Cemented carbide wire drawing die as a tool material has been
increasingly used for cutting tools, wear-resistant tools,
impact-resistant tools, and other products with special purpose.
Cemented carbide was first used in stretching mold area and has
gone though cast iron mold, alloy steel mold, diamond dies,
cemented carbide dies, polycrystalline module die and other
developmental stages. With the property of high wear resistance,
good polishing performance, low friction coefficient, etc.,
cemented carbide drawing die has been a substitute of steel mould
which is used to stretching steel and non-ferrous metal.
Tungsten Carbide Wire Guide Wire Drawing Dies
We choose best tungsten carbide core, to make the drawing dies with
high hardness,Good good thermal conductivity, low coefficient of
friction. It is suitable for drawing black metal,wire drawing,
large size of tube, low working environment required.
Advantages
1. simple manufacture
2. corrosion resistance
3. strong impact resistance
4. quite low manufacturing cost
The Tungsten carbide Wire Drawing Die is a tool that consists of
highly polished, shaped hole through which wire is drawn to reduce
its diameter.
Grade List
| Grade | Co (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 | Wire drawing dies for wear-resistance impact-resistance |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 |
| XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 |
| XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 |
| XC500 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2600 | Stamping dies for impact-resistance |
| XC501 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2800 |
| XC800 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 2600 |
| XC8001 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 3000 |
| XC900 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2400 |
| XC901 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2600 |
| Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
| XCN61 | 16.0-17.0 | 13.5-14.0 | 83.5-84.5 | 3200 | Stamping dies for High temperature-resistance |
| XCN71 | 17.0-18.0 | 13.3-13.8 | 82.0-83.0 | 3000 |
| Dimension |
| d | l | d1 | h | h1 | ll |
| 8 | 6 | 0.1-1.0 | 0.1-10.6 | 1.0-2.0 | 0.8-1.2 |
| 10 | 8 | 0.1-1.2 | 0.1-0.8 | 1.5-4.0 | 1.0-1.8 |
| 12 | 10 | 0.2-2.0 | 0.1-1.5 | 2.0-5.0 | 1.6-2.5 |
| 14 | 12 | 0.4-2.5 | 0.2-2.0 | 4.0-5.0 | 1.8-2.5 |
| 16 | 13 | 0.5-3.0 | 0.2-2.5 | 4.0-5.5 | 2.0-3.0 |
| 20 | 17 | 1.0-6.0 | 0.6-3.0 | 5.0-8.0 | 2.5-4.0 |
| 25 | 20 | 2.0-8.5 | 1.0-3.5 | 7.0-10.0 | 3.0-4.5 |
| 30 | 24 | 3.5-12.0 | 2.0-4.0 | 8.0-12.0 | 3.0-5.0 |
| Notice: α=8°10° 12° 14°16°18° β=40° 60° 90° γ=60° 75° 90° |
| Dimension | |
| ΦD | b | H | α | β | γ |
| 6.0-8.0 | 0..2 | 4.0-6.0 | 10° | 40° | 60° |
| 6.0-8.0 | 0.4-0.8 | 4.0-6.0 | 40° | * |
| 8.0-22.0 | 0.4-5.7 | 6.0-20.0 | 10°-14° | 40° |
| 8.0-26.0 | 0.4-8.0 | 6.0-16.0 | 16° | 40° |
| 30.0-140.0 | 3.7-84.0 | 21.0-50.0 | 14°-20° | * |
| Dimension |
| ΦD | Φd | H | α | γ | R |
| 16.0-110.0 | 2.0-60.0 | 14-52 | 3° | 60° | 40 |
| 16.0-110.0 | 20.0-62.0 | 35-45 | 4° | 15.0-40.0 |
| 16.0-110.0 | 2.8-88.0 | 13-50 | 24° | 3.0-10.0 |
| 16.0-110.0 | 20.0-70.0 | 32-55 | * | 3.0-40.0 |
| Dimension |
| d | l | A | h | h1 | ll |
| 16 | 12 | 1.5-2.5 | 0.5-1.5 | 4.0-6.0 | 1.0-2.0 |
| 22 | 18 | 2.0-4.0 | 1.0-2.0 | 5.5-9.0 | 1.5-2.5 |
| 30 | 21 | 3.5-7.0 | 1.5-2.5 | 8.0-12.0 | 1.5-2.5 |
| 35 | 25 | 6.5-10.0 | 2.5-3.5 | 10.0-14.0 | 2.0-4.0 |
| 45 | 25 | 8.0-15.0 | 3.0-4.0 | 10.0-14.0 | 2.0-4.0 |
| 50 | 28 | 12.0-20.0 | 3.5-4.5 | 12.0-16.0 | 2.0-4.0 |
| 60 | 30 | 18.0-25.0 | 4.0-5.5 | 12.0-16.0 | 3.0-5.0 |
| 65 | 32 | 22.0-30.0 | 5.0-7.0 | 12.0-16.0 | 4.0-6.0 |
| 70 | 35 | 26.0-35.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 80 | 35 | 30.0-40.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 90 | 40 | 35.0-45.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 100 | 40 | 40.0-50.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 120 | 45 | 45.0-55.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| Note:α=14° 16° 20° β=40° γ=60° |
| Dimension | |
| d | l | A | B | h | h1 | ll |
| 20 | 12 | 1.5-3.5 | 0.5-1.5 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
| 22 | 12 | 3.0-5.0 | 0.5-2.0 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
| 25 | 15 | 3.5-7.0 | 0.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
| 32 | 16 | 5.0-9.0 | 1.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
| 35 | 18 | 7.0-12.0 | 1.0-6.0 | 2.0-3.0 | 5.0-8.0 | 2.0-3.0 |
| 25 | 7.0-12.0 | 2.0-8.0 | 2.5-3.5 | 7.0-13.0 | 2.5-3.5 |
| 45 | 20 | 10.0-15.0 | 1.0-7.0 | 2.5-3.5 | 5.0-8.0 | 2.5-3.5 |
| 25 | 10.0-15.0 | 4.0-10.0 | 3.0-4.0 | 7.0-14.0 | 2.5-3.5 |
| 50 | 20 | 12.0-24.0 | 1.0-8.0 | 2.5-3.5 | 5.0-96.0 | 2.5-3.5 |
| 28 | 12.0-24.0 | 6.0-16.0 | 3.0-4.0 | 8.0-15.0 | 2.5-3.5 |
| 60 | 20 | 18.0-32.0 | 1.0-9.0 | 2.5-4.0 | 5.0-10.0 | 2.5-3.5 |
| 30 | 18.0-32.0 | 7.0-16.0 | 4.0-6.0 | 8.0-16.0 | 3.0-5.0 |
| Note: α=° 14°18° β=40° 60° γ=60° |
Production Process
FAQ
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to
15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the
freight charge. In addition, whether samples are free or not
depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put
some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full
payment; if the products are out of stock, you need to make about
50 percent of full payment and then we will start the production
process. However, you still need to pay the rest of charges before
we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can
discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.
