Solid Tungsten Carbide Wood Cutting Strip / Solid Carbide Wood
Cutter Strip
Application of alloy tungsten carbide bar
carbide strip,tungsten carbide strips,tungsten carbide bar,Carbide
squre bar Carbide strip is widely used for general wood cutters /
hard wood cutters, plastic and tobacco cutting.
And it is suitable for the production of various types of motors,
electronic progressive dies punches.
Adopting HIP sintering technology and cryogenic processing
technology, the inner metallographic structure of carbide
strips/blanks/plates has been improved,which avoids the crack
causing during the strips/blanks/plates cutting and forming
process.
All of our tungsten carbide strips/blanks/plates must be strictly
inspected and only those without any harm such as pore, bubbles,
cracks etc. can be shipped out. We produce various sizes and grades
of tungsten carbide strips/blanks/plates as per client's
requirements.
Tungsten carbide strips/blanks/plates are usually used for general
wood cutters / hard wood cutters ,plastic and tobacco cutting . and
meet the ISO9001:2018 quanlity standard. We can make the shipment
in the shortest delivery time with the compeititve price than any
other factory.
We can manufacture various cemented carbide strips/blanks/plates as
per customer's requirments based on the differente markets.
Minimum grind stock: thickness: +0.2mm, width: +0.3mm, length:
+0.2mm.
Parallelism & flatness tolerances: within 0.5mm.
Quality assurance
All the produces must be inspected strictly with the ultrasonic and
only those haven't any harm such as pore can be shipped out
High density, high wear& impact resistance, which lead them a long
life time
1. Raw material purity greater than 99.95%, impurity content is
very small, the physical properties of the sheet more stable
2. Use of spray drying technology, the material in the fully sealed
conditions using high purity nitrogen protection, effectively
reducing the mixing process of oxygen preparation possibilities,
higher purity, the material is not easy to contaminate
3. Plate density uniform: 300Mpa isostatic press suppression,
effectively prevent the production defects, plate density is more
uniform
4. Board compactness is very good, strength and hardness indicators
are very good: the use of low-pressure sintering ship technology,
the plate effectively eliminate the pores, the quality is more
stable
5. Use of low-temperature treatment technology, so that the
internal micro-structure of the board can be improved, the internal
stress can be greatly eliminated, to avoid the board in the cutting
process cracks
Details of tungsten carbide plate
| Grade | YG6A | YG8 | YG15 | YG20 | YS2T |
| ISO Code | K10 | K20 | K30-40 | K05 | K10-K20 |
| Co | % | 6 | 8 | 15 | 20 | 15 |
| Wc | % | 94 | 92 | 85 | 80 | 85 |
| Density | G/cm3 | 14.9 | 14.7 | 14.5 | 13.5 | 14.5 |
| T.R.S | Mpa | 1850 | 2400 | 2500 | 2800 | 2350 |
| Hardness | HRA | 92 | 89.5 | 87.5 | 85.5 | 92 |
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application |
|
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 |
|
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and
non-metallic materials,and semi-finishing vehicles for intermittent
cutting. |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy
steel and ordinary cast iron. |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials,
medium to cutting, semi-finishing and finishing. |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their
alloys and non-metallic materials, roughing of sections and rough
cutting. |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and
stamping parts and cores for hard alloy automatic presses. |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring
tools, etc. |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel
tubes with high compression ratios and working under large
stresses. |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring
piece. |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball,
screw, nut stamping die, hot rolling twist drill bit plate. |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries
for cold heading, cold punching, cold pressing die. |
| ISO Code | Grain Size (μm) | Co (mass) % | TRS (GPa) *1 | Hardness | Application | Work Material |
| HRA *2 | HV *3 | For Automatic Lathes | Cemented Carbide Plates | General Steel | Stainless Steel | Cast Iron | Non-ferrous Metal | Heat Resistant Alloy |
| Cemented Carbide | K20 | ＜0.9 | 10 | 2.5 | 91 | 1550 | √ | √ | | | | | O |
| K10 | ＜1.0 | 6 | 2 | 92 | 1700 | √ | √ | | | O | O | |
| M20 | ＜3.0 | 9 | 2 | 90.5 | 1450 | √ | √ | O | O | | | |
| Cermet | P10 | ＜2.0 | 18 | 2 | 91.2 | 1500 | √ | | O | | | | |
| P20 | ＜2.0 | 19 | 2 | 90.5 | 1450 | √ | | O | | | | |
Detail Specification For Tungsten Carbide Strips
| Dimensions(mm) |
| L | W | R | T |
| 15 | ±1.0 | 3 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 15 | ±1.0 | 4 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 20 | ±1.0 | 2 | ±0.5 | R4 | 2~4 | ﹢0.5 |
| 20 | ±1.0 | 3 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 20 | ±1.0 | 4 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 20 | ±1.0 | 5 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| Type Number | Dimensions(mm) |
| L | W | R | T |
| 20*6*T*R3 | 20 | ±1.0 | 6 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 25*4*T*R3 | 25 | ±1.0 | 4 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 30*4*T*R3 | 30 | ±2.0 | 4 | ±0.5 | R3 | 2~6 | ﹢0.5 |
| 30*3*T*R4 | 30 | ±2.0 | 3 | ±0.5 | R4 | 2~6 | ﹢0.5 |
| 30*4*T*R3 | 30 | ±2.0 | 4 | ±0.5 | R4 | 2~6 | ﹢0.5 |
Production Process
FAQ
A1: What is your main product?
Q1: The main product include tungsten carbide bar, carbide wire
drawing die, carbide drill bit button, carbide SS10 tips, carbide
strip and carbide plate, anvil, carbide inserts, and any other
carbide products and customized products.
A2: Do you have certification on your products?
Q2: ISO 9001:2018
A3: What is about your general delivery date?
Q3: Nomally 7-15 workdays .
A4: What is your packing?
Q4: We use standard export packing and customization is available.
A5: Can I get the samples?
Q5: Sure, contact us directly.
