Customized Shaft Seal Ring Tungsten Carbide Seal Sic Silicone Ring
Different tungsten carbide ring Applicatioin
Our sealing rings are used in many different mechanical seal industries.
Carbide seal ring property
The characteristics of abrasive resistance, corrosion resistance and stable property performance, high fracture strength , thermal wear, durable;
1. High precision, high hardness,various size and o type ring,the maximun OD can reach 500mm;
2. Tungsten carbide material,mechanical rotary files,seal ring,stable performance, low maintenance and friction,surface polished,new model can be designed;
3. Factory wholesale price,customise service according to your needs.
We can supply various kinds of tungsten carbide rings , such as dynamic and static rings , the dynamic and static ring is also named sealing rings used for mechanical seal and it also suitable for the equipment which's grinding medium between 0.2 and 0.6mm , grinding & dispersing size between 100and 500 nano.
| Grade | Application Mediums |
| XC100 | oli,sewage,weak acid and alkaline,light hydrocarbon,solid granules |
| XC101 |
| XC200 |
| XC201 |
| XC401 | dry gas seals |
| XN100 | oil,sewage,weak acid and alkaline,light hydrocarbon,solid granules,sea water |
| XN101 |
| XN300 |
| XN301 |
| XCN30 |
| XCN31 |
| XTP10 | oil,sewage,weak acid and alkaline,light hydrocarbon,solid granules |
| XTN10 | oil,sewage,weak acid and alkaline,light hydrocar |
| Grade | Co (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 |
| XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 |
| XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 |
| XC401 | 12.7-13.2 | 14.0-14.3 | 87.5-88.5 | 3000 |
| Grade | Ni (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) |
| XN100 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 1800 |
| XN101 | 6.5-7.5 | 14.5-14.8 | 88.5-91.0 | 2200 |
| XN300 | 10.0-11.0 | 14.2-14.6 | 86.5-89.5 | 2100 |
| XN301 | 10.0-11.0 | 14.2-14.6 | 86.5-89.5 | 2400 |
| XTN10 | 19.5-20.5 | 6.5-7.5 | 90.5-92.0 | 1600 |
| Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness(HRA) | TRS (≥N/mm²) |
| XCN 30 | 9.5-10.5 | 14.0-14.5 | 88.0-90.0 | 2400 |
| XCN31 | 9.5-10.5 | 14.0-14.5 | 88.0-90.0 | 3200 |
| XTP10 | 7.0-9.0 | 11.5-13.0 | 89.5-91.0 | 1800 |
| Spec | Dimension & Tolerance |
| A1 | A2 | A3 |
| d (H13) | D (u6) | H | d (H13) | d1 | D (u6) | H | h | d (H13) | d1 | D (u6) | H | h |
| 18 | 19(20) | 28(26) | 5 | 19(20) | 25(26) | 28 | 5 | 1.5 | 19 | 22 | 28 | 5 | 1.5 |
| 20 | 21(22) | 30(28) | 21(22) | 27(28) | 30 | 21 | 24 | 30 |
| 22 | 23(24) | 32(30) | 23(24) | 29(30) | 32 | 23 | 26 | 32 |
| 24 | 25(26) | 35(32) | 25(26) | 31(32) | 35 | 25 | 29 | 35 |
| 25 | 26(28) | 36(34) | 26(28) | 32(34) | 36 | 26 | 30 | 36 |
| 28 | 29(31) | 39(37) | 6 | 29(31) | 35(37) | 39 | 6 | 29 | 33 | 39 | 6 |
| 30 | 31(33) | 41(39) | 31(33) | 37(39) | 41 | 31 | 35 | 41 |
| 32 | 33(36) | 43(42) | 33(36) | 39(42) | 43 | 33 | 37 | 43 |
| 33 | 34(36) | 44(42) | 34(36) | 40(42) | 44 | 34 | 38 | 44 |
| 35 | 36(38) | 46(44) | 36(38) | 42(44) | 46 | 36 | 40 | 46 |
| 38 | 39(41) | 50(47) | 39(41) | 45(47) | 50 | 39 | 44 | 50 |
| 40 | 41(43) | 52(49) | 41(43) | 47(49) | 52 | 41 | 46 | 52 |
| 43 | 44(46) | 55(52) | 44(46) | 50(52) | 55 | 44 | 49 | 55 |
| 45 | 46(48) | 57(54) | 46(48) | 52(54) | 57 | 46 | 51 | 57 |
| 48 | 49(51) | 60(57) | 49(51) | 55(57) | 60 | 49 | 54 | 60 |
| 50 | 51(53) | 62(59) | 51(53) | 57(59) | 62 | 51 | 56 | 62 |
| 53 | 54(56) | 65(62) | 54(56) | 60(62) | 65 | 54 | 59 | 65 |
| 55 | 56(58) | 67(64) | 56(58) | 62(64) | 67 | 56 | 61 | 67 |
| Spec | Dimension & Tolerance |
| D -0.2 | D (H13) | d1 (h8) | L | L1 | h1 | h | Rubber ring cross-sectionnal diameter |
| 18 | 32.7 | 19 | 26.7 | 20 | 8.5 | 6.5 | 4 | 3.55 |
| 20 | 34.7 | 21 | 28.7 |
| 22 | 36.7 | 23 | 30.7 |
| 24 | 38.7 | 25 | 32.7 |
| 25 | 39.7 | 26 | 33.7 |
| 28 | 42.7 | 29 | 36.7 |
| 30 | 44.7 | 31 | 38.7 |
| 32 | 47.7 | 33 | 41.7 |
| 33 | 47.7 | 34 | 41.7 |
| 35 | 49.7 | 36 | 43.7 |
| 38 | 55.7 | 39 | 48.7 | 21 | 8.9 | 5 | 4.1 |
| 40 | 57.7 | 41 | 50.7 |
| 43 | 60.7 | 44 | 53.7 |
| 45 | 62.7 | 46 | 55.7 |
| 48 | 65.7 | 49 | 58.7 |
| 50 | 69.7 | 51 | 61.7 | 21.5 | 8.8 | 4.7 |
| 53 | 72.7 | 54 | 64.7 |
| 55 | 74.7 | 56 | 66.7 |
| 58 | 77.7 | 59 | 69.7 |
| 60 | 79.7 | 61 | 71.7 |
| 63 | 82.7 | 64 | 74.7 |
| 65 | 84.7 | 66 | 76.7 |
| 68 | 89.7 | 69 | 80.6 |
| 70 | 91.7 | 71 | 82.6 | 22.5 | 9.2 | 5.3 |
| Spec | Dimension & Tolerance |
| D -0.2 | d (H13) | d1 (h8) | L | L1 | Rubber ring cross-sectionnal diameter |
| 14 | 24.7 | 15 | 20.8 | 12.8 | 9.6 | 2.4 |
| 16 | 26.7 | 17 | 22.8 |
| 18 | 32.7 | 19 | 26.8 | 14.5 | 10 | 3.55 |
| 20 | 34.7 | 21 | 28.8 |
| 22 | 36.7 | 23 | 30.8 |
| 24 | 38.7 | 25 | 32.8 |
| 25 | 39.7 | 26 | 33.8 |
| 28 | 42.7 | 29 | 36.8 |
| 30 | 44.7 | 31 | 38.8 |
| 32 | 47.7 | 33 | 41.8 |
| 33 | 47.7 | 34 | 41.8 |
| 35 | 49.7 | 36 | 43.8 |
| 38 | 55.7 | 39 | 48.8 | 15 | 9.9 | 4.1 |
| 40 | 57.7 | 41 | 50.8 |
| 43 | 60.7 | 44 | 53.8 |
| 45 | 62.7 | 46 | 55.8 |
| 48 | 65.7 | 49 | 58.8 |
| 50 | 69.7 | 51 | 61.8 | 15.5 | 9.8 | 4.7 |
| 53 | 72.7 | 54 | 64.8 |
| 55 | 74.7 | 56 | 66.8 |
| 58 | 77.7 | 59 | 69.8 |
| 60 | 79.7 | 61 | 71.8 |
| 63 | 82.7 | 64 | 74.8 |
| 65 | 84.7 | 66 | 76.8 |
| 68 | 89.7 | 69 | 80.8 | 16 | 9.7 | 5.3 |
| Spec | Dimension & Tolerance |
| D -0.1 | D (H13) | d1 (h8) | L | h | h1 | h2 | h3 | Rubber ring cross-sectionnal diameter |
| 14 | 24.8 | 15 | 20.3 | 10 | 2.5 | 3 | 2 | 4.5 | 2.65 |
| 16 | 26.8 | 17 | 22.3 |
| 18 | 32.8 | 19 | 27.7 | 11 | 4.2 | 2.5 | 3.55 |
| 20 | 34.8 | 21 | 28.7 |
| 22 | 36.8 | 23 | 30.7 |
| 24 | 38.8 | 25 | 32.7 | 12 | 3.5 |
| 25 | 39.8 | 26 | 33.7 |
| 28 | 42.8 | 29 | 37.7 |
| 30 | 44.8 | 31 | 38.7 |
| 32 | 47.8 | 33 | 41.7 |
| 33 | 47.8 | 34 | 41.7 |
| 35 | 49.8 | 36 | 43.7 |
| 38 | 55.8 | 39 | 49.7 |
| 40 | 57.8 | 41 | 51.7 | 13 | 4 |
| 43 | 60.8 | 44 | 54.7 |
| Spec | Dimension & Tolerance |
| D (h7) | d (H13) | L | h1 | h2 | Rubber ring cross-sectionnal diameter |
| 14 | 24.8 | 15 | 10 | 2 | 4.5 | 2.65 |
| 16 | 26.8 | 17 |
| 18 | 32.8 | 19 | 11 | 2.5 | 3.55 |
| 20 | 34.8 | 21 |
| 22 | 36.8 | 23 |
| 24 | 38.8 | 25 | 12 |
| 25 | 39.8 | 26 |
| 28 | 42.8 | 29 |
| 30 | 44.8 | 31 |
| 32 | 47.8 | 33 |
| 33 | 47.8 | 34 |
| 35 | 49.8 | 36 |
| 38 | 55.8 | 39 |
| 40 | 57.8 | 41 | 13 |
| 43 | 60.8 | 44 |
| 45 | 62.8 | 46 |
| 48 | 65.8 | 49 |
| 50 | 69.8 | 51 |
| 53 | 71.8 | 54 | 14.5 |
| 55 | 74.8 | 56 |
| Spec | Dimension & Tolerance |
| d (H13) | D (h7) | L |
| 14 | 15 | 23 | 4 |
| 16 | 17 | 25 |
| 18 | 19 | 29 |
| 20 | 21 | 31 |
| 22 | 23 | 33 | 4.5 |
| 24 | 25 | 35 |
| 25 | 26 | 36 | 6 |
| 28 | 29 | 39 |
| 30 | 31 | 41 | 7 |
| 32 | 33 | 44 |
| 33 | 34 | 44 |
| 35 | 36 | 46 |
| 38 | 39 | 51 |
| 40 | 41 | 53 |
| 43 | 44 | 56 | 7.5 |
| 45 | 46 | 58 |
| 48 | 49 | 61 |
| 50 | 51 | 65 |
| 53 | 54 | 68 |
| 55 | 56 | 70 |
| spec | Dimension&Tolerance | SIZE |
| d | D1 | D2 | D3 | L | L1 | L2 | L3 | L4 | H | R |
| 50 | 52 | 70.8 | 63.8 | 66 | 20 | 5.5 | 2 | 5 | 5 | 64 | 2.5 | Ø66*3.55 |
| 53 | 55 | 74.8 | 67.8 | 70 | 67 | Ø70*3.55 |
| 55 | 57 | 76.8 | 69.8 | 72 | 69 | Ø71.4*3.55 |
| 58 | 60 | 79.8 | 72.8 | 75 | 72 | Ø75*3.55 |
| 60 | 62 | 81.8 | 74.8 | 77 | 74 | Ø76.6*3.55 |
| 63 | 65 | 84.8 | 77.8 | 80 | 77 | Ø80*3.55 |
| 65 | 67 | 90.5 | 82.5 | 85 | 25 | 6.5 | 79 | Ø85*3.55 |
| 68 | 70 | 93.5 | 85.5 | 88 | 82 | Ø88*3.55 |
| 70 | 72 | 95.5 | 87.5 | 90 | 84 | Ø90*3.55 |
| 75 | 77 | 100.5 | 92.5 | 95 | 89 | Ø95*3.55 |
| 80 | 82 | 105.5 | 97.5 | 100 | 94 | Ø100*3.55 |
| 85 | 87 | 110.5 | 102.5 | 105 | 99 | Ø110*3.55 |
| 90 | 92 | 115.5 | 107.5 | 110 | 103 | Ø66*3.55 |
| spec | Dimension&Tolerance | SIZE |
| d | D | D1 | D2 | D3 | L | L1 | L2 | L3 | L4 | L5 | H | R |
| 50 | 52 | 72 | 63.8 | 70.8 | 66 | 20 | 8 | 3 | 2 | 5 | 5 | 64 | 2.5 | Ø66*3.55 |
| 53 | 55 | 76 | 67.8 | 74.8 | 70 | 67 | Ø70*3.55 |
| 55 | 57 | 78 | 69.8 | 76.8 | 72 | 69 | Ø71.4*3.55 |
| 58 | 60 | 81 | 72.8 | 79.8 | 75 | 72 | Ø75*3.55 |
| 60 | 62 | 83 | 74.8 | 81.8 | 77 | 74 | Ø76.6*3.55 |
| 63 | 65 | 86 | 77.8 | 84.8 | 80 | 77 | Ø80*3.55 |
| 65 | 67 | 91 | 82.5 | 90.5 | 85 | 25 | 79 | Ø85*3.55 |
| 68 | 70 | 94 | 85.5 | 93.5 | 88 | 82 | Ø88*3.55 |
| 70 | 72 | 96 | 87.5 | 95.5 | 90 | 84 | Ø90*3.55 |
| 75 | 77 | 101 | 92.5 | 100.5 | 95 | 89 | Ø95*3.55 |
| 80 | 82 | 106 | 97.5 | 105.5 | 100 | 94 | Ø100*3.55 |
| 85 | 87 | 111 | 102.5 | 107.5 | 105 | 99 | Ø104.3*3.55 |
| 90 | 92 | 116 | 107.5 | 112.5 | 110 | 103 | Ø110*3.55 |
| spec | Dimension&Tolerance | | Diameter |
| d | d1 | d2 | D | L | L1 | L2 | H | n | R |
| 18 | 18 | 24.5 | 26(24) | 30 | 12 | 6 | 4.5 | 27 | 4 | 4 | 3.55 |
| 20 | 20 | 26.5 | 28(26) | 32 | 29 |
| 22 | 22 | 28.5 | 30(28) | 34 | 31 |
| 24 | 24 | 30.5 | 32(30) | 36 | 33 |
| 25 | 25 | 31.5 | 33(31) | 37 | 34 |
| 28 | 28 | 34.5 | 36(34) | 37 | 37 |
| 30 | 30 | 36.5 | 38(36) | 40 | 39 |
| 32 | 32 | 38.5 | 40(38) | 42 | 41 |
| 33 | 33 | 39.5 | 41(39) | 44 | 42 |
| 35 | 35 | 41.5 | 43(41) | 45 | 44 |
| 38 | 38 | 44.5 | 46(44) | 47 | 15 | 7 | 47 | 5 |
| 40 | 40 | 46.5 | 51(49) | 51 | 49 |
| 43 | 43 | 49.5 | 53(51) | 53 | 52 |
| spec | Dimension & Tolerance |
| d | d1 | d2 | d3 | d4 | d5 | D | L | L1 | L2 | L3 | H | R | n | diameter |
| 18 | 19 | 22 | 28.5 | 30 | 26 | 20 | 34 | 17 | 6 | 12 | 4.5 | 31 | 4 | 4 | 3.55 |
| 20 | 21 | 24 | 30.5 | 32 | 28 | 22 | 36 | 33 |
| 22 | 23 | 26 | 32.5 | 34 | 30 | 24 | 38 | 35 |
| 24 | 25 | 28 | 34.5 | 36 | 32 | 26 | 40 | 37 |
| 25 | 26 | 30 | 36.5 | 38 | 34 | 28 | 42 | 39 |
| 28 | 29 | 33 | 39.5 | 41 | 37 | 31 | 45 | 20 | 14.5 | 42 |
| 30 | 31 | 35 | 41.5 | 43 | 39 | 33 | 47 | 44 |
| 32 | 33 | 38 | 44.5 | 46 | 41 | 36 | 51 | 7 | 47 | 5 |
| 33 | 34 | 40 | 46.5 | 48 | 42 | 36 | 53 | 47 |
| 35 | 36 | 43 | 49.5 | 51 | 44 | 38 | 56 | 21 | 15.5 | 49 |
| 38 | 39 | 45 | 51.5 | 53 | 47 | 41 | 58 | 49 |
| 40 | 41 | 48 | 54.5 | 56 | 49 | 43 | 61 | 52 |
| 43 | 44 | 50 | 56.5 | 58 | 52 | 46 | 63 | 54 |
Production Process
FAQ
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to 15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full payment; if the products are out of stock, you need to make about 50 percent of full payment and then we will start the production process. However, you still need to pay the rest of charges before we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.
