OEM/ODM K10,K20,K30 Cemented Tungsten Carbide
Bushisng/Sleeves/Shaft Sleeves
Application
Tungsten carbide bushing is a kind of component to protect the
equipment.It can effectively reduce the wear between bearing and
equipment.And also can achieve a guiding role.
In the aspect of stamping die, tungsten carbide bushing is widely
used, because of its wear resistance and high finish. During the
manufacturing process,tungsten carbide bushing does not need to be
replaced often. So as to achieve the higher utilization rate of
equipment and personnel. In the aspect of drawing, cemented carbide
bushes are mainly drawn by some copper parts and stainless steel
parts. With the increase of oil production, the oil on shallow
surface decreases. In order to ensure the use of oil, people
gradually develop to large deep wells and high slope wells, but the
difficulty of oil exploitation is gradually increasing, so the
parts and components of oil exploitation require good wear
resistance, corrosion resistance or impact resistance. As a
wear-resistant part in petroleum machinery wells, cemented carbide
bushing is high hardness, good wear resistance, high finish and
other properties. Cemented carbide bushing have been more and more
widely used in modern society to meet the needs of daily use and
special properties. Factory adopt spray welding technology to
improve the durability and service life of cemented carbide
bushing. The hardness of cemented carbide bushing after spray
welding can reach better wear resistance of HRC60, which can meet
the requirements of petroleum machinery industry. But the cemented
carbide bushing after spray welding needs to be machined in order
to ensure the size requirements and accuracy requirements of the
drawings.
Grade List
Cobalt Binder Grades |
|
Grade | Binder(wt%) | Density(g/cm3) | Hardness(HRA) | TRS(≥N/mm2) |
YG3 | 3 | 15.30 | 91.00 | 1180 |
YG6 | 6 | 15.10 | 92.00 | 1420 |
YG6X | 6 | 15.10 | 91.00 | 1600 |
YG8 | 8 | 14.90 | 90.00 | 1600 |
YG10 | 10 | 14.70 | 89.00 | 1900 |
YG10X | 10 | 14.70 | 89.50 | 2200 |
YG15 | 15 | 14.20 | 87.00 | 2100 |
YG20 | 20 | 13.70 | 85.50 | 2500 |
YG20C | 20 | 13.70 | 82.00 | 2200 |
YG30 | 30 | 12.80 | 82.00 | 2750 |
Drawing
Production Process
FAQ
A1: What is your main product?
Q1: The main product include tungsten carbide bar, carbide wire
drawing die, carbide drill bit button, carbide SS10 tips, carbide
strip and carbide plate, anvil, carbide inserts, and any other
carbide products and customized products.
A2: Do you have certification on your products?
Q2: ISO 9001:2018
A3: What is about your general delivery date?
Q3: Normally 7-15 workdays .
A4: What is your packing?
Q4: We use standard export packing and customization is available.
A5: Can I get the samples?
Q5: Sure, contact us directly.
