Wear-resistance Tungsten Carbide Tip YG6 Carbide Brazed Tips
Xingyu carbide inserts are used in geothermal drag bits with a
perfect balance of wear resistance and toughness essential to cut
softer rocks, sands, and clay. A wide range of carbide tips can be
offered for building flat, chevron, stepped drag bits and
percussion rock bits.Widely used in mining, construction,
exploration and water well drilling applications.
Advantage
1. High toughness and wear resistance
2. High weldability.
3. Made with Virgin Raw Materials.
4. All products go through in-process and final inspection.
5. Dimensionally accurate, durable and reliable performance
6. Excellent quality and competitive price
Grade List
| ISO | Grade | Typical Property Values |
| Density (g/cm³) | Bending Strength (N/mm³) | Hardness HRA | Performance & Applications | Equivalent to ISO |
| K | YG813 | 14.4 | 2200 | 92 | Good wear resistance,higher bending strength and higher
adhesion.Resistance to bonding maching of refractory
alloys,stainless steel and high manganese steel,etc. | K10-K20 /M20 |
| YG610 | 14.7 | 2000 | 93.5 | Good thermal strength and high wear resistnace.Continuous or
intermittent cutting of cast irons,refractory alloys and
hardened-steel. | K01-K10 |
| YT726 | 14.2 | 1800 | 93 | High red hardness and wear-resistance.Turning and milling of
chilled cat irons,alloy cast irons and hardend-steel. | K05-K10 /M20 |
| YG6X | 14.9 | 2100 | 92.5 | High wear resistance and higher,strength.Maching of chilled alloy
cast irons and refractory alloy steel or finishing of common cast
irons. | K10 |
| YG6A | 14.9 | 1850 | 93 | Good wear resistance .Semi-finishin of chilled cst iron,nonferrous
metals & their alloys;semi-finishing and finishing of hardened
steel,alloy steel. | K10 |
| ZK20 (YG6) | 15 | 2100 | 91.1 | High wear-resistane and better,impact and shock resistance higher
than YG3X.Semi | K15-20 |
| ZK30 (YG8) | 14.7 | 2100 | 90 | High strength and good,impact and shock resistance,but wear
resistance and cutting speed comparatively lower.Roughing of cast
irons,non-ferrous metals & their alooys as well as non metallic
materials at low cutting speed. | K30 |
| ZK10UF | 14.8 | 2500 | 93 | Semi-finishing and finishing of cast irons and nonferrous metals. | K05-K15 |
| ZK20UF | 14.6 | 2700 | 92.7 | Semi-finishing and roughing of cast iron and non-ferrous metals. | K05-K15 |
| ZK30UF | 14.4 | 2800 | 91.7 | Superior toughness and high hardness .Finishing and rigid milling
of cast irons and non-ferrous metals,ideal for hole-machining
tools. | K20-K40 |
| YG522 | 14.3 | 2000 | 92.5 | Good wear resistance and high strength.Specially suitbale for
maching of bamboo and wood.Also suitable for machining of
non-ferrous metal and nonmetallic material,with long life time. | K15-K30 |
| YG546 | 14.6 | 2700 | 90.5 | Good toughness,high strength,capable of resisting high impact load
.Roughing of stainless steel and cast irons. | K30-K40 |
| YG3X | 15.2 | 1450 | 93.6 | Best wear resistance among W-Co alloys impact toughness
comparatively low.High speed finishing of small chip section of
cast irons,non-ferrous metals& their alloys,hardened-steel and
alloy steel. | K01 |
| Type | Dimension(mm) | Approx unit weighting(g) |
| Right | Left | l | t | s | r | YG6 | YG8 | YT5 | YT14 |
| A612 | A612Z | 12.0 | 8.0 | 3.0 | 8.0 | 3.2 | 3.1 | 2.8 | 2.5 |
| A615 | A615Z | 15.0 | 10.0 | 4.0 | 10.0 | 6.1 | 6.0 | 5.3 | 4.7 |
| A618 | A618Z | 18.0 | 12.0 | 4.5 | 12.0 | 10.0 | 9.8 | 8.6 | 7.7 |
| Type | Dimension(mm) | Approx unit weighting(g) |
| l | t | s | e | YG6 | YG8 | YT5 | YT14 |
| A106 | 6.0 | 5.0 | 2.5 | / | 1.1 | 1.1 | 1.0 | 0.9 |
| A108 | 8.0 | 7.0 | 3.0 | / | 2.6 | 2.5 | 2.1 | 1.9 |
| A110 | 10.0 | 6.0 | 3.5 | 0.8 | 2.9 | 2.8 | 2.4 | 2.2 |
| A112 | 12.0 | 10.0 | 4.0 | 0.8 | 6.8 | 6.6 | 5.7 | 5.2 |
| A114 | 14.0 | 12.0 | 4.5 | 0.8 | 10.7 | 10.5 | 8.9 | 8.2 |
| A116 | 16.0 | 10.0 | 5.5 | 0.8 | 12.3 | 12.0 | 10.5 | 9.8 |
| A118 | 18.0 | 12.0 | 7.0 | 0.8 | 21.3 | 20.8 | 17.5 | 16.3 |
| A118A | 18.0 | 16.0 | 6.0 | 0.8 | 24.7 | 24.3 | 21.0 | 19.7 |
| A120 | 20.0 | 12.0 | 7.0 | 0.8 | 23.2 | 22.8 | 20.0 | 18.6 |
| A122 | 22.0 | 15.0 | 8.5 | 0.8 | 39.2 | 38.5 | 33.0 | 30.6 |
| A122A | 22.0 | 18.0 | 7.0 | 0.8 | 39.2 | 38.5 | 32.8 | 30.5 |
| A125 | 25.0 | 15.0 | 8.5 | 0.8 | 44.5 | 43.7 | 36.5 | 34.0 |
| A125A | 25.0 | 20.0 | 10.0 | 0.8 | 71.0 | 69.8 | 58.0 | 53.8 |
| A130 | 30.0 | 16.0 | 10.0 | 0.8 | 66.4 | 65.3 | 56.5 | 51.7 |
| A136 | 36.0 | 20.0 | 10.0 | 0.8 | 98.2 | 96.8 | 81.0 | 75.2 |
| A140 | 40.0 | 18.0 | 10.5 | 1.2 | 105.6 | 103.8 | 88.0 | 81.7 |
| A150 | 50.0 | 20.0 | 10.5 | 1.2 | 149.0 | 146.0 | 125.0 | 116.0 |
| A160 | 60.0 | 22.0 | 10.5 | 1.2 | 197.0 | 193.0 | 168.0 | 156.0 |
| A170 | 70.0 | 25.0 | 12.0 | 1.2 | 298.0 | 293.0 | 257.0 | 239.0 |
Application Scene
Production Process
FAQ
Q1: How long is your delivery period?
A1: It depends on specific conditions. However, it could be 10 to
15 days on average.
Q2: Do you offer samples?
A2: Yes, we do offer samples. However, buyers need to pay for the
freight charge. In addition, whether samples are free or not
depends on the quantity you buy.
Q3: How do you pack the products?
A3: In general, we use wood, plastic or carton boxes. We also put
some soft materials inside to prevent possible damage on products.
Q4: How much advance payment do I need to make?
A4: If the products you buy are in stock, you need to make full
payment; if the products are out of stock, you need to make about
50 percent of full payment and then we will start the production
process. However, you still need to pay the rest of charges before
we deliver the products.
Q5: What kinds of payment do you accept?
A5: In addition to the patterns of payment shown above, you can
discuss with us about in which way you would like to pay.
Please contact us if you have any other questions.
