Manufacturer Tungsten Carbide Extrusion Die Wire Drawing Die
Typical application areas
1. Steel wire
2. Stainless steel wire
3. Copper wire
4. Aluminum wire
5. Tungsten wire
6. Various other ferrous and non-ferrous metal wire types
Advantage
1. With Submicron grain size
2. High wear resistance and toughness
3. High combination abilities
4. Precision Ground and polished
5. With HIP sintering
Our advantages of hard metal cemented tungsten carbide wire drawing
dies of long life time
1. Use 100% tungsten carbide raw material
2. ISO 9001 Certification
3. with over 20 years experience
4. Advanced technology,automatic pressing,HIP sintering
5. The tolerance of polish and ground can be +0.005/-0.005m
Grade List
| Grade | Co (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 | Wire drawing dies for wear-resistance impact-resistance |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 |
| XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 |
| XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 |
| XC500 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2600 | Stamping dies for impact-resistance |
| XC501 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2800 |
| XC800 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 2600 |
| XC8001 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 3000 |
| XC900 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2400 |
| XC901 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2600 |
| Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
| XCN61 | 16.0-17.0 | 13.5-14.0 | 83.5-84.5 | 3200 | Stamping dies for High temperature-resistance |
| XCN71 | 17.0-18.0 | 13.3-13.8 | 82.0-83.0 | 3000 |
| Dimension |
| d | l | d1 | h | h1 | ll |
| 8 | 6 | 0.1-1.0 | 0.1-10.6 | 1.0-2.0 | 0.8-1.2 |
| 10 | 8 | 0.1-1.2 | 0.1-0.8 | 1.5-4.0 | 1.0-1.8 |
| 12 | 10 | 0.2-2.0 | 0.1-1.5 | 2.0-5.0 | 1.6-2.5 |
| 14 | 12 | 0.4-2.5 | 0.2-2.0 | 4.0-5.0 | 1.8-2.5 |
| 16 | 13 | 0.5-3.0 | 0.2-2.5 | 4.0-5.5 | 2.0-3.0 |
| 20 | 17 | 1.0-6.0 | 0.6-3.0 | 5.0-8.0 | 2.5-4.0 |
| 25 | 20 | 2.0-8.5 | 1.0-3.5 | 7.0-10.0 | 3.0-4.5 |
| 30 | 24 | 3.5-12.0 | 2.0-4.0 | 8.0-12.0 | 3.0-5.0 |
| Notice: α=8°10° 12° 14°16°18° β=40° 60° 90° γ=60° 75° 90° |
| Dimension | |
| ΦD | b | H | α | β | γ |
| 6.0-8.0 | 0..2 | 4.0-6.0 | 10° | 40° | 60° |
| 6.0-8.0 | 0.4-0.8 | 4.0-6.0 | 40° | * |
| 8.0-22.0 | 0.4-5.7 | 6.0-20.0 | 10°-14° | 40° |
| 8.0-26.0 | 0.4-8.0 | 6.0-16.0 | 16° | 40° |
| 30.0-140.0 | 3.7-84.0 | 21.0-50.0 | 14°-20° | * |
| Dimension |
| ΦD | Φd | H | α | γ | R |
| 16.0-110.0 | 2.0-60.0 | 14-52 | 3° | 60° | 40 |
| 16.0-110.0 | 20.0-62.0 | 35-45 | 4° | 15.0-40.0 |
| 16.0-110.0 | 2.8-88.0 | 13-50 | 24° | 3.0-10.0 |
| 16.0-110.0 | 20.0-70.0 | 32-55 | * | 3.0-40.0 |
| Dimension |
| d | l | A | h | h1 | ll |
| 16 | 12 | 1.5-2.5 | 0.5-1.5 | 4.0-6.0 | 1.0-2.0 |
| 22 | 18 | 2.0-4.0 | 1.0-2.0 | 5.5-9.0 | 1.5-2.5 |
| 30 | 21 | 3.5-7.0 | 1.5-2.5 | 8.0-12.0 | 1.5-2.5 |
| 35 | 25 | 6.5-10.0 | 2.5-3.5 | 10.0-14.0 | 2.0-4.0 |
| 45 | 25 | 8.0-15.0 | 3.0-4.0 | 10.0-14.0 | 2.0-4.0 |
| 50 | 28 | 12.0-20.0 | 3.5-4.5 | 12.0-16.0 | 2.0-4.0 |
| 60 | 30 | 18.0-25.0 | 4.0-5.5 | 12.0-16.0 | 3.0-5.0 |
| 65 | 32 | 22.0-30.0 | 5.0-7.0 | 12.0-16.0 | 4.0-6.0 |
| 70 | 35 | 26.0-35.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 80 | 35 | 30.0-40.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 90 | 40 | 35.0-45.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 100 | 40 | 40.0-50.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 120 | 45 | 45.0-55.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| Note:α=14° 16° 20° β=40° γ=60° |
| Dimension | |
| d | l | A | B | h | h1 | ll |
| 20 | 12 | 1.5-3.5 | 0.5-1.5 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
| 22 | 12 | 3.0-5.0 | 0.5-2.0 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
| 25 | 15 | 3.5-7.0 | 0.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
| 32 | 16 | 5.0-9.0 | 1.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
| 35 | 18 | 7.0-12.0 | 1.0-6.0 | 2.0-3.0 | 5.0-8.0 | 2.0-3.0 |
| 25 | 7.0-12.0 | 2.0-8.0 | 2.5-3.5 | 7.0-13.0 | 2.5-3.5 |
| 45 | 20 | 10.0-15.0 | 1.0-7.0 | 2.5-3.5 | 5.0-8.0 | 2.5-3.5 |
| 25 | 10.0-15.0 | 4.0-10.0 | 3.0-4.0 | 7.0-14.0 | 2.5-3.5 |
| 50 | 20 | 12.0-24.0 | 1.0-8.0 | 2.5-3.5 | 5.0-96.0 | 2.5-3.5 |
| 28 | 12.0-24.0 | 6.0-16.0 | 3.0-4.0 | 8.0-15.0 | 2.5-3.5 |
| 60 | 20 | 18.0-32.0 | 1.0-9.0 | 2.5-4.0 | 5.0-10.0 | 2.5-3.5 |
| 30 | 18.0-32.0 | 7.0-16.0 | 4.0-6.0 | 8.0-16.0 | 3.0-5.0 |
| Note: α=° 14°18° β=40° 60° γ=60° |
| Dimension |
| d | l | d1 | h | h1 | R |
| 30 | 18 | 10.0-18.0 | 5.0-10.0 | 1.0-2.0 | 30 |
| 50 | 32 | 16.00-24.0 | 9.0-14.0 | 1.5-2.5 | 30 |
| 60 | 35 | 22.0-30.0 | 9.0-14.0 | 1.5-2.5 | 30 |
| 70 | 42 | 28.0-36.0 | 12.0-18.0 | 2.0-3.0 | 35 |
| 75 | 42 | 34.0-42.0 | 12.0-18.0 | 2.0-3.0 | 35 |
| 85 | 45 | 40.0-48.0 | 12.0-18.0 | 2.5-3.5 | 40 |
| 100 | 50 | 46.0-56.0 | 16.0-22.0 | 2.5-3.5 | 40 |
| 110 | 50 | 54.0-64.0 | 16.0-22.0 | 2.5-3.5 | 40 |
| 125 | 55 | 62.0-72.0 | 16.0-22.0 | 2.5-3.5 | 40 |
| Note: γ=60° |
Production Process
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are Factory with 20 years of production experience.
Q2: Where is your factory?
A2: We are located in Zigong city, Sichuan province where is3 hours
away from Chengdu by Car.
Q3: Is the competitive price of tungsten carbide parabolic buttons?
A3: We have our own Factory. Due to strong production and
distribution system, we promise to offer our customers the most
competitive price.
Q4: Is the top quality?
A4: Yes. All products will be tested before bulk processing, and we
will check the physi-cal properties, shape and
tolerance for ensuring qualified products before shipping.
Q5: What’s your delivery time ?
A5: For the normal type which we have mold it takes 10-15 days
after receiving the advance payment.
For the non standard which we do not have mold it takes 15-25 days
after receiving the advance payment.
Q6: Do you provide samples ? is it free or extra ?
A6: Yes, we could offer the sample (less than 1Kg) for free charge
without freight charge.
