100% Virgin Material HIP Tungsten Carbide Blocks,Plates,Tungsten
Carbide Strips
Introduction description of tungsten carbide plates
Material: 100% virgin raw material with submicron and average grain
size
Tolerance: strict tolerance extent control, which can reach ±0.01mm
Grades: various for choice: YG6, YG8, YG8C, YG11C, YG15C
Types: standard, conical, parabolic, ballistic
Physical performance: high hardness and impact toughness, very good
mechanical and chemical stability Customized hard metal carbide
plates
Advantage
1. Easy brazing
2. High wear resistance and toughness
3. High hardness and precision
4. With HIP sintering
5. Used for making the woodworking tools, TCT router bits
Application
Hard metal carbide plates usually used for general wood
cutters/hard wood cutters, plastic and tobacco cutting
Production in a range of woodworking tools, plane, hop cutter,
sub-cutter
Carbide plates for making plane cutters and broaches
Cemented carbide blocks for liner plates
Tungsten carbide block
Tungsten carbide blocks for sale
Wear-resistant tungsten steel application
1. For punching molds
Suitable for the production of punching copper, aluminum, stainless
steel, cold rolled sheet, EI film, Q195, SPCC, silicon steel,
hardware, standard parts, upper and lower punch and other
high-speed mold and multi-station into the mold.
2. For the production of wear-resistant tools
Such as woodworking industry tools, plastic crushing tools.
3. For the production of high temperature parts, wear parts,
anti-shielding components.
Such as machine guide, ATM anti-theft board.
4. Used in the production of chemical industry corrosion-resistant
parts.
5. Radiation anticorrosive materials for medical devices.
6. Different purposes of the performance of cemented carbide sheet
is not consistent, should be used in accordance with the
appropriate use
of appropriate materials carbide plate.
Our company use advanced molding process in order to produce
various of plates to meet clients requirements.
Details of tungsten carbide plate
| Grade | YG6A | YG8 | YG15 | YG20 | YS2T |
| ISO Code | K10 | K20 | K30-40 | K05 | K10-K20 |
| Co | % | 6 | 8 | 15 | 20 | 15 |
| Wc | % | 94 | 92 | 85 | 80 | 85 |
| Density | G/cm3 | 14.9 | 14.7 | 14.5 | 13.5 | 14.5 |
| T.R.S | Mpa | 1850 | 2400 | 2500 | 2800 | 2350 |
| Hardness | HRA | 92 | 89.5 | 87.5 | 85.5 | 92 |
Grade List
| Grade | ISO Code | Chemical Composition(%) | Physical Mechanical Properties (≥) | Application |
|
| WC | Co | Density g/cm3 | Hardness(HRA) | T.R.S N/mm2 |
|
| YG3 | K01 | 97 | 3 | 14.90 | 91.00 | 1180 | Suitable for finishing of cast iron,non-ferrous metals,alloys and
non-metallic materials,and semi-finishing vehicles for intermittent
cutting. |
| YG6 | K10 | 94 | 6 | 15.10 | 92.00 | 1420 | Finishing of chilled hard alloy cast iron and heat resistant alloy
steel and ordinary cast iron. |
| YG6X | K20 | 94 | 6 | 15.10 | 91.00 | 1600 | Cast iron, non-ferrous metals and alloys, non-metallic materials,
medium to cutting, semi-finishing and finishing. |
| YG8 | K20-K30 | 92 | 8 | 14.90 | 90.00 | 1600 | Suitable for casting of cast iron, non-ferrous metals and their
alloys and non-metallic materials, roughing of sections and rough
cutting. |
| YG10 | K40 | 90 | 10 | 14.70 | 89.00 | 1900 | Suitable for the production of drawing dies, wear parts and
stamping parts and cores for hard alloy automatic presses. |
| YG10X | K40 | 89 | 10 | 14.70 | 89.50 | 2200 | Suitable for small diameter micro drills, end mills, rotary boring
tools, etc. |
| YG15 | K30 | 85 | 15 | 14.70 | 87.00 | 2100 | Forging, perforating and stamping tools for steel bars and steel
tubes with high compression ratios and working under large
stresses. |
| YG20 | K30 | 80 | 20 | 13.70 | 85.50 | 2500 | Stamping die, stamping watch parts, musical instrument spring
piece. |
| YG20C | K40 | 80 | 20 | 13.70 | 82.00 | 2200 | punching battery case, toothpaste skin mold, small size steel ball,
screw, nut stamping die, hot rolling twist drill bit plate. |
| YG30 | G60 | 70 | 30 | 12.80 | 82.00 | 2750 | Production of standard parts, bearings, tools and other industries
for cold heading, cold punching, cold pressing die. |
| ISO Code | Grain Size (μm) | Co (mass) % | TRS (GPa) *1 | Hardness | Application | Work Material |
| HRA *2 | HV *3 | For Automatic Lathes | Cemented Carbide Plates | General Steel | Stainless Steel | Cast Iron | Non-ferrous Metal | Heat Resistant Alloy |
| Cemented Carbide | K20 | ＜0.9 | 10 | 2.5 | 91 | 1550 | √ | √ | | | | | O |
| K10 | ＜1.0 | 6 | 2 | 92 | 1700 | √ | √ | | | O | O | |
| M20 | ＜3.0 | 9 | 2 | 90.5 | 1450 | √ | √ | O | O | | | |
| Cermet | P10 | ＜2.0 | 18 | 2 | 91.2 | 1500 | √ | | O | | | | |
| P20 | ＜2.0 | 19 | 2 | 90.5 | 1450 | √ | | O | | | | |
Detail Specification For Tungsten Carbide Strips
| Type Number | Dimensions(mm) |
| L | L | T |
| 60*40*T | 60 | ±2.0 | 40 | ±2.0 | 3~10 | ﹢1.0 |
| 66*61*T | 66 | ±2.0 | 61 | ±2.0 | 3~15 | ﹢1.0 |
| 100*100*T | 100 | ±5.0 | 100 | ±5.0 | 3~20 | ﹢1.0 |
| 150*100*T | 150 | ±5.0 | 100 | ±5.0 | 3~20 | ﹢1.0 |
Production Process
FAQ
Q1: Is Xingyu trading company or manufacturer ?
A1: We are manufacture of tungsten carbide since established on
1998,specializing in carbide plates/bushings/rollers/special wear
parts.
Q2: Has Xingyu acquired the foremost certification of ISO 9001?
A2: Xingyu has been endorsed with the ISO 9001 rating since 2008.
Q3: When can I get the offer after sending inquiry?
A3: We usually quote within 24 hours after we get your inquiry .If
you are very urgent to get the price please call us or tell us in
your email so that we will regard your inquiry priority.
Q4: Could Xingyu sales staff be reached anytime for assistance
regarding orders or general enquire ?
A4: Our sales staff operates between 8am-5pm Monday to Saturday.
